Specification for House Kits
Brothock - Cairnie - Seaton - Why choose timber frame? - Kit Specification

FLOOR
Wallplate
Floor Joists

Insulation


WALLS
External Panels





Load Bearing Partitions




Sill Plates
Head Binder
Firestops
Internal Partitions

 

- 25 x 150 whitewood
- 45 x 120/220 whitewood
  - stress graded
- 140mm glasswool on mesh support


- 45x140 whitewood framing
  @ 600mm c/s
- 90 x 195 whitewood lintels to   openings
-  9.5mm O.S.B.

- 45 x 90 whitewood framing
  @ 600mm c/s
- 90 x 195lintels - one row of dwangs

- 22 x 140 whitewood
- 38 x 140 whitewood
- 38 x 50 whiteboard offsaw
- 45 x 70 whitewood framing
  @ 600mm c/s
  

JOINERY
Windows





External Doors







Internal Screen



Internal Door Sets


Finishings


Stair


Shelving



Sundries





PLASTERBOARD,
Plasterboard





 Insulation







Structural


Door Furniture


- Scandinavian red pine "H" type hung reversible windows
- Severe exposure rated
- 23mm factory fitted low "E" double glazing night vents and lockable handles

- FRONT - Swedoor "Georgian" type
- three point locking door set
- letterbox pre-fitted
- REAR - Swedoor "Eaton" type
- three point locking door set
- factory double glazed
- GARAGE - Catnic "Carlton" steel up & over door

- 15 pane mahogany door pre-glazed with clear bevelled glass hung in red pine frame
- Screens supplied unglazed

- pre-finished sapele veneer
- sliding mirror doors to all bedroom wardrobes

- moulded skirtings, window sills & apron plates
- all in red pine

- para pine stringers, whitewood treads, ply risers
- hemlock turned spindles and newels

M.D.F. rails to all wardrobes/cupboards
brass wardrobe rails - slatted shelves to linen cupboards

- Timloc 1168 drop in lift access ceiling hatch and meter board




INSULATION & IRONMONGERY
- 12.5mm TE Duplex to external walls
- 12.5mm TE Plain to walls and ceiling
- 12.5mm TE moisture resistant to shower walls
Insulation
- 125mm Gyproc cornics to lounge, dining & hall

- 230mm glasswool to roofspace
- 140mm glasswool to external walls
- 60mm glasswool to bathroom walls
- 140mm glasswool to attic coomb and hanging posts with ventilation spacers
- 140mm Kingsoan Thermopitch TP10 (90 + 50) to attic coomb
- 140mm glasswool to attic hanging posts
- Stainless steel wall tiles, girder truss shoes, truss clips

- EXTERNAL - brass door furniture
- INTERNAL - polished brass "Victorian" lever furniture



 
ROOF
Roof trusses at 600c/c





Roof truss bracing

Sarking

Roffing felt

Water tank stool

Fascia boards

Soffit Ply

Counter battens

Tiling battens
- 27.5 degree pre-fabricated fink type
- or 45/50 degree pre-fabricated attic   type


- 25 x 100 whiteboard offsaw

- 9.5mm O.S.B

- Sartec type IF

- as BS5268 detail

- 21 x 195 profiled redwood

- 9mm WPB with ventilation
   slots-mesh fitted
- 13 x 38 whiteboard offsaw

- 25 x 50 whitewood offsaw 		 


PRESERVATION TREATMENT
All structural and external timbers to be pressure Impregnated against rot and fungal attack.


STRUCTURAL TIMBERS
All structural timbers are stress graded and comply with the relevant British Standards and the regulations of the National House Building Council.


The above specificatation is for general guidance only and may be subject to change or alteration as deemed necessary all at the discretion of Mcnulty Homes. This specification does not create or form any part of any future contract or warranty.



RESIDENTIAL • PRIVATE • COMMERCIAL • ALSO DESIGN & BUILD CONTRACTS
Webservices provided by Keillor Graphics professional webdesign company based in Angus (Arbroath).:::. Disclaimer, policy and terms